Bona Power Scrubber
Bona PowerScrubber
Deep Cleaning for Wooden & Multi-Surface Floors
The Bona PowerScrubber is a high-performance floor cleaning machine designed to deliver a deep, thorough clean across various floor surfaces. With its dual counter-rotating cylindrical brushes, this compact yet powerful scrubber reaches deep into the grains of wooden floors, tackling dirt, grime, and buildup effortlessly. Whether it's brushed parquet, beveled edges, oiled floors, or even outdoor wooden decks, the Bona PowerScrubber ensures a spotless finish without leaving swirl marks.
Key Benefits
- Deep Cleaning Power – Effectively removes tough dirt and stains from wooden floors.
- Multi-Surface Versatility – Works on indoor wooden floors, oiled wood, and outdoor decks.
- Ergonomic & Easy to Use – Lightweight, easy to maneuver, and simple to transport.
- Quick-Drying Technology – Built-in rubber squeegees ensure fast water pickup for a convenient clean.
- Compatible with Bona Detergents – Achieve superior results when paired with Bona Deep Clean Solution.
Ideal for both domestic and commercial cleaning, the Bona PowerScrubber is the ultimate tool for maintaining pristine floors with minimal effort. Upgrade your floor care routine today with the Bona PowerScrubber!
Bona PowerScrubber Technical Data
- Motor rating: Max 2300
- Power supply: 220-240 V / 50 Hz
- Machine weight: 34,5 kg
- Scrubbing brush: 2 x 400 mm soft white nylon
- Brush RPM: 1100
- Solution capacity: 10 litres
- Recovery tank capacity: 10 litres
- Dimensions: 520 mm x 470 mm x 300 mm
- Recommended detergents: Bona Deep Clean Solution, Bona Cleaner
Scrubbing Machine Operation
Prior to use, read the enclosed product manual and safety instructions! Below recommendations are provided in good faith and based on our current experience with the machine but each floor and situation must be individually assessed prior to use to ensure that the floor is in good enough condition to handle machine cleaning.
Cleaning
- Vacuum floor to remove dust and loose grit.
- Fill the solution tank with cleaning solution (diluted). Maximum 10 litres.
- Connect the machine to an earthed 220-230 V power outlet.
- Set the turning knob to medium pressure (handle must be in upright position to alter the turning knob).
- While distributing detergent, move the machine forwards in a straight path. The machine can be used in any direction of the wood, but if possible, follow the direction of the wood.
- Return to your original position, following the same path. On lightly soiled surfaces you may skip distributing detergent on your return pass. On heavily soiled surfaces keep distributing detergent on both your forward and return pass.
- Do not allow excess solution to pool or puddle on the floor. Immediately wipe off spills or areas where the machine has missed with a mop!
- Continue cleaning in a new path until the whole floor has been cleaned.
If more power is needed, such as to remove heavily ingrained dirt or stubborn scuff marks, the turning knob can be switched to maximum pressure. Observe however that when running at maximum pressure it is crucial that the machine is kept in motion and never run with dry brushes! Risk of damage to floor.
Power Scrubber Important Notes
For successful results and a long lasting machine.
- The Bona PowerScrubber is designed to pickup liquid and not dirt and gravel. Vacuum floor before machine cleaning to ensure that grit and stone will not damage or wear on the internal turbine.
- Always keep the machine in motion while cleaning and never run the brushes dry! Standing still on the same spot with the machine running may cause damage to the floor!
- Start cleaning at low or medium pressure and increase gradually as required. There is no need to be more aggressive on the floor than necessary.
- After cleaning with the machine, the brush house will be wet and cause some after-drip. To minimize after-drip, stop dispensing cleaning solution (while still keeping the machine in motion) approx. 30 sec before coming to a complete stop.
- If pausing the cleaning job, then place the wet machine on an insensitive surface or place a waterproof sheet under the machine to prevent any possible after-drip of detergent from damaging the floor.
- Check the water level in the solution tank regularly. If the machine produces a ticking sound, it means that no cleaning solution is feeding the water pump. Empty the recovery tank and fill up with more cleaning solution in the solution tank. Do not run the water pump dry for an extended period.
- Empty and clean the machine after every use. Do not store it with dirt water or cleaning solution inside.
